Home uses for pressure washers
Cleaning large surfaces such as a driveway, a deck or the outside of a home could take a long time to do by hand. A portable pressure washer with water tank are an instrument that combines the natural cleaning power of water and high pressure to deliver an effective wash in a fraction of the time.
Like all tools, to make the most the pressure washer you need to learn the way it works. This guide can help you understand the basics of working with a pressure washer.
How a pressure washer works
How does a pressure washer obtain its pressure
A pressure washer makes use of the water that is pumped out by an garden hose. The hose is connected to the machine, and a high-speed pump in the machine raises the pressure of the water until it can be utilized as a very aggressive stream. The intensity of the spray is controlled by the spray nozzle.
What are the various pressure washer nozzles?
The nozzles are what provide the proper cleaning power. There are five standard nozzles which are distinguished by the degree of focused it is.
The red nozzle makes the appearance of a powerful, thin jet of water, which is ideal for the most difficult staining.
The yellow nozzle is a step down in intensity and is best to remove mildew and paint.
The green nozzle can be described as a general purpose cleaning nozzle.
The white nozzle has the largest spray, making it best for lighter-duty cleaning and rinsing.
The black nozzle is the only one that works with soap. In addition, you can buy an turbo sprayer, a multipurpose nozzle or an Surface cleaning accessory which is great to clean patios, decks and much more.
Although the most effective directions to use the pressure washer are included in the purchase, this general overview can give you an overview of the process.
- Clean the area you’ll be cleaning to make sure that all delicate items have been taken away. Sweep away dirt and debris and cover everything that can’t be moved with a sheet of tarp.
- Be sure to look around the area, so that you are aware of any outlets, windows and vents.
- Select and connect the right nozzle to the task.
- Connect your garden hose to the pressure washer, and make sure to give the machine a good whirl to ensure that everything is securely fastened and the machine is safe for use.
- Put on a pair of safety goggles to prevent debris from getting back into your eyes.
- Turn on the water supply via the outdoor water spigot.
- Squeeze at the trigger of the wand until you release the air that could be in the line.
- Follow the specific instructions of your machine for starting.
- Before you use to spray, check the strength that the spray is able to emit in a protected area and adjust as needed.
- It is now time to start cleaning.
- After shutting off your pressure washer and shutting off the water supply, ensure you squeeze the trigger to let any water pressure to escape before disconnecting the hose and any other components.
Pressure washing tips
- Pressure washers require lots of water. Make sure you have adequate drainage where you’re working, or else things could quickly get messy.
- The most crucial aspect to cleaning safely is using the right nozzle for the job. Be careful, as the wrong nozzle can damage siding and wood.
- Beware of spraying windows, painted surfaces or outdoor fixtures. Also, avoid spraying electrical lines.
- The closer you are to a surface, the more intensely the pressure washer cleans. Start your cleaning at some distance, perhaps a few feet away. If you require more power then gradually move the sprayer closer to the surface you’re cleaning.
- Never use a pressure washer when you’re on a ladder.
- When cleaning vertically, you should move from top to bottom in a side to side pattern.
- Small areas of work with clearly stated goals.
- If you’re tired, stop for a moment.